Buy the blind stitch foot for the Janome 1200d overlocker here. part 200806000 or ring 1300137041

  • Category: Overlocker spare parts
  • SKU: 1200d blind stitch foot





Click here to see all available accessories for the Janome 1200d. also suits the Elna 845

BLIND STITCH FOOT (D)The  adjustable  guide  on  the  blind  stitch  foot  ensures that any weight of fabric is trimmed, overlocked and invisibly hemmed in one quick step. Change the stitch and it becomes a wonderful guide for decorative pin-tucks, lacy fagoting or flatlocking as seen in ready to wear.INVISIBLE HEMMINGWhat  a  great  way  to  professionally  hem  a  garment! The fabric edge is trimmed, overlocked and invisibly hemmed into place in one easy step.1.   Select sewing program:(2) Overlock 32.   Thread and set up machine as indicated on the  machine or in your instruction manual. Set SL between 4 – 5.3.   Attach blind stitch foot.4.   Fold and press hem under desired amount. Fold it  again back toward right side. Leave a 7 mm (1/4”) to 1 cm (3/8”) extension of hem  allowance to the right. Place hem under presser  foot with folded edge against guide “A”. See Figure 28.5.  Lower presser foot. Slowly lower needle into  folded edge. Adjust guide “A” by turning screw  “B” so the needle just catches one or two fibers of  the fold. See Figures 28 and 29.6.   Once the guide is adjusted correctly, continue  sewing keeping folded edge against white plastic guide “A”.See Figure 30.NOTE:Loosen needle thread tension one number for bulky or crisp fabrics.Blind Stitch Foot (D):  200-806-000282930AB