Cover hem foot M for Janome 1200d-part-200801304

buy the cover hem foot M for the Janome 1200d part number 200801304. buy here on line or call us 1300137041.

Find info about all the feet that fits the Janome 1200d and the Elna 845 here.

FOLD UNDER 1/4” COVER HEM AND ADD LACE TRIM 1. Select sewing program:(10) Triple Cover Hem or Cover Hem Wide 2. Thread and set up machine as indicated on the machine or in your instruction manual. 3. Attach cover hem foot.4. Fold or finger press approximately 5 cm (2”) of the fabric under 6 mm (1/4”) to form hem. Place folded edge into H-1 guide. See Figure 10.5. Raise presser foot, snap guide onto the foot; and slide fabric underneath presser foot. Place lace on the right side of H-1 guide and underneath presser foot, using tweezers as needed. Lower presser foot. See Figure 11.*6. Sew first two stitches by hand turning the hand- wheel. Hold fabric in your left hand and lace in your right hand and continue sewing. Check fabric and lace placement in H-1 guide. See Figure 12.Cover Hem Foot (M): 200-801-304Lace Attachment Guide (H-1): 200-801-005101112*NOTE:Adjust screw to get needle drop in correct position.