Elastic Gathering foot (C) for Janome 1200d and elna 845

Buy the Elastic Gathering foot (C) Suits the 1200d and Elna 845 overlocking and Cover hem machines. part number 200805009. buy online or call us on 1300137041.

Click here to see more about the optional extra feet that fit the Janome 1200d and the Elna 845 overlockers and hemming machines.

OVERLOCKING ELASTIC GATHERS1. Select sewing program:(1) Safety 4-Thread Stitch or(2) 3-Thread Stitch Wide2. Thread and set up machine as indicated on the machine or in your instruction manual. Set Stitch Width Dial to widest width. Set SL to 3 1/2-4. Test Sew.3. Attach elastic gathering foot. Snap elastic gatherer “A” onto elastic gathering foot. See Figure 1.4. Loosen adjustment screw “B” and insert elastic into slot “C”. (Cut a generous length to allow for test sewing.) Pull elastic under foot and extend it behind foot. Tighten screw “B” to set amount of gathering. See Figure 1.5. Position guide “D”; the elastic should be on the needle plate right edge and next to cutting blades. Place fabric with right side up under elastic in front of cutting blades. See Figure 2.6. Lower needle(s) into fabric. Lower the presser foot. Sew first two stitches by hand turning handwheel. Test sew, adjusting elastic gatherer for fullness and checking that only fabric and not the elastic is being cut. Sew at medium speed. See Figure 3.NOTE:If you are using elastic lace, insert lace scallop to left side of elastic gatherer.