Janome-1200d-tape binder-part-200813000


Buy the Janome 1200d tape binder here. part number, 200813000. buy here or online. ring 1300137041


  • Category: Overlocker spare parts
  • SKU: 1200d-tape-binder

Price:AU$139.00


BUY NOW!

Description

Buy the Janome 1200d tape binder here. part number, 200813000. buy here or online. ring 1300137041

1200d_accessories_final[1].pdf

Click here to see more about optional feet for the Janome 1200d and the Elna 845 overlockers and hemming machines


APE BINDER

 No  need  to  pre-iron  your  bias  strip;  the  tape  binder automatically folds a 40 mm (1 1/2”) bias strip at the same time it is applied to the fabric edge. It is the per-fect  finish  for  blankets,  placemats  and  jackets.  The binding is secured with the Chainstitch.

CREATING AND ATTACHING BIAS TAPE BINDING

1. Select sewing program:(10) Chainstitch

2. Thread and set up machine as indicated on the ma-chine or in your instruction manual. 

3. Attach A/B foot. Secure attachment holder base and attachment holder onto machine. See Figure 51.*

4. Cut a strip of bias tape 4 cm (1-1/2”) wide. Cut one end  at  a  45°  angle.  Insert  cut  angle  into  tape  binder. Right  side  of  fabric  should  face  machine  as  it  enters binder. Check that fabric is inserted correctly. Secure tape binder onto attachment holder. See Figure 52.

5.  Place  bias  tape  under  presser  foot.  Lower  needle into  folded  bias  tape.  If  necessary,  reposition  tape binder to have only 2 mm (1/8”) of folded bias on left side of needle. See Figure 53.

6. Insert fabric edge into slot between the folded bias tape. Lower the presser foot. Sew first two stitches by hand  turning  handwheel.  Continue  sewing  at  a  me-dium speed. Check if fabric and tape are feeding correctly.  Readjust  binder  position  when  necessary. See Figure 54.

Tape Binder:200-813-000

Attachment Holder:200-813-103 extra $16