Lace attachment guide for Janome 1200d-H1


buy the Lace attachment H1 from the sewing machine company. buy on line or ring us on 1300137041. Part number 200801005


  • Category: Overlocker spare parts
  • SKU: H1 lace attachment guide

Price:AU$30.00


BUY NOW!

Description

buy the Lace attachment H1 from the sewing machine company. buy on line or ring us on 1300137041. Part number 200801005

1200d_accessories_final[1].pdf

Click here for info on all parts fitting the Janome 1200d

COVER HEM FOOT (M) AND LACE ATTACHMENT GUIDE (H-1)The  Cover  Hem  stitch  is  used  by  professionals  as a  hemming  method.  This  efficient  and  clever  lace attachment  guide  folds  under  perfect  6  mm  (1/4”) hemmed  edges.  At  the  same  moment  it’s  hemming, it attaches lace or trim placed underneath the fabric. This method of hemming is best accomplished when sewing a hem flat. The side seam is sewn after lace application.FOLD UNDER 1/4” COVER HEM AND ADD LACE TRIM 1.   Select sewing program:(10) Triple Cover Hem or Cover Hem Wide 2.   Thread and set up machine as indicated on the  machine or in your instruction manual. 3.   Attach cover hem foot.4.   Fold or finger press approximately 5 cm (2”) of  the fabric under 6 mm (1/4”) to form hem. Place  folded edge into H-1 guide. See Figure 10.5.  Raise presser foot, snap guide onto the foot; and  slide fabric underneath presser foot. Place lace  on the right side of H-1 guide and underneath  presser foot, using tweezers as needed. Lower  presser foot. See Figure 11.*6.   Sew first two stitches by hand turning the hand- wheel. Hold fabric in your left hand and lace in  your right hand and continue sewing. Check  fabric and lace placement in H-1 guide.  See Figure 12.Cover Hem Foot (M): 200-801-304Lace Attachment Guide (H-1): 200-801-00